Product Description
A specially formulated acid gel designed to rejuvenate painted surfaces by removing rust stains and surface oxidation from them. It is ideal for removing salt and contamination in general prior to application of a new coat of paint. Navimare Gelclean will brighten and remove surface oxidation formed on non-ferrous material such as aluminium.
Physical Properties
| Colour / Texture | : Clear |
| Volume Solids | : 25% |
| Specific gravity | : 1.1 gr/ml |
| VOC | : 58 gr/liter |
| Flashpoint | : None |
Application Data
The product is designed for application by brush or damp cloth. Apply liberally. Wait for 15 minutes or longer if necessary and then wash off with copious amounts of fresh water. Allow to dry before primer or finish application.
Surface Preparation
| Painted surfaces | : Painted surfaces should be dampened prior to application of Navimare Gelclean for best results. |
| Non-ferrous materials | : On non-ferrous materials it should be applied direct to the surface. |
Health and Safety
Observe the precautionary notices on the label of the container. A material safety data sheet is available upon request and national or local safety regulations should be followed. This product is intended for use by professional applicators. As a general rule, avoid skin and eye contact by wearing overalls, gloves, goggles, mask, etc.
- Take precaution to avoid skin and eye contact (i.e. gloves, goggles, face mask, barrier creams, etc.)
- Provide adequate ventilation.
- If the product comes in contact with the skin, wash thoroughly with lukewarm water and soap or suitable industrial cleaner. If the eyes are contaminated flush with water (minimum 10 minutes) and obtain medical attention at once.
- Since these products contain flammable materials, keep away from sparks and open flames. No smoking should be permitted in the area.
- Observe all precautionary notices on containers.
Disclaimer
The information in this data sheet is provided to the best of our knowledge. However, we have no control over either quality or condition of the substrate and other factors affecting the use and application of this product. Therefore, we cannot accept any liability whatsoever or howsoever arising from the performance of the product or for any loss or damage arising from the use of this product. We reserve the right to change the product without notice.
